How to Fix Common Mazda 3 Key Problems
The Mazda 3 is an elegant compact car with a premium interior and agile handling. It's also a good value when compared to other compact cars available.
It's a real pain to lose keys. It can be costly to replace keys that are lost, as well as driving your car to the dealer to reprogram your key.
The key does not lock or unlock the door.
It is dangerous to leave the doors unlocked, especially when the vehicle is moving. If the door is opened while the vehicle is moving it could cause passengers to fall or be injured. To avoid this risk be sure to keep the keys away from children. Children might find them appealing and may want to play with them, which can cause the power windows or other controls to function and even make the vehicle move.
If you notice that the key fob isn't locking or unlocking the doors, it's likely that the battery is dead. The button cell battery in the key fob has a short life span, therefore it is essential to replace it on a regular basis. A quality battery is expected to last between two and three years. It is important to replace the battery with a new one that is the same voltage and same dimensions as the initial.
A key pairing issue may be the reason for your key fob not working. It's possible that the keyfob was not properly associated with the vehicle when it was purchased. In this situation the dealer has to reprogram the key fob. This can be done in under an hour. The dealership can also reset the on-board computer to erase any remaining electric current. This will not solve the problem with your key fob's ability to lock or unlock doors.
Dead coin battery
If your key fob isn't activating or unlocking your car, it may be due to the battery being dead. It's a common issue, however, it can be fixed. You can change your battery yourself and avoid the hassle of going to a dealer. The procedure is easy and requires only a few tools.
Press the auxiliary key button located on the back of the Mazda flip key. This will open the auxiliary metal key, allowing you to take it off. You'll see an opening on both sides of the case once the auxiliary metal is removed. Make use of a tape-wrapped flathead screwdriver to open the case, starting with one side and then the other. Gently pry the two sides of the case and put them aside.
You can now replace the battery of your key fob. You don't want damage to the rubber ring that the battery is fixed. After the battery has been replaced, you can put it back in your case and use the new key fob.
The majority of stores that sell batteries also carry a replacement battery. Find a CR2025 battery. These batteries are often used in calculators and watches however, they can also be purchased at auto parts stores or online. Changing the battery in your Mazda 3 is easy and fast, and will save you money when you go to the dealer.
Key pairing issue
If you've been driving your Mazda 3 for a long period of time and then it suddenly stopped working, it could be a problem with the remote keyless system receiver module. This is particularly likely in the event that the key fob's inner chip is damaged. It can be caused by several factors, like dropping or wetting the key.
mazda 6 car key replacement are protected by rubber seals, so a splash of rain will not cause damage to them. However, submerging it into ocean or pool water is an even more serious issue due to the highly conductivity of salt may cause damage to the electronic components.
If your key fob is not working, you're likely in need of new batteries. A quick search of the web will reveal that there are numerous third-party replacement batteries. But, it's important to remember that they may not work with your Mazda 3. It is best to purchase it from the dealer to ensure that it will work with your Mazda 3.
After replacing the battery, you should be able to use your key fob for the first time. However, if your remote doesn't respond when press the lock button, the key is likely to be in power-saving mode. Press the lock button 5 times, and hold it until the red light blinks.
Reprogramming the key
Mazda's keyless entry feature allows you to open the door and begin it without the need for a regular key. It's a great feature, but the process to reprogramme the remote or the key can be confusing for some. It also requires a special machine that only the dealer or an automotive locksmith can access. The machine is connected the car's computer and initiates the process of programming for the new key or remote.
The first thing to do is have at least two keys that function for the Mazda. Then you can begin the reprogramming of an existing key. Initially, the functions of the new FOB are suspended to protect the vehicle from theft. Once you've reprogrammed your new key, these functions will be activated again.
After that, you can use the new key to open the doors and start the engine. You should test it first to make sure it works. Keep a spare set of keys around if you are worried about losing your keys.
Making a spare key for your Mazda is a fairly simple procedure. Just follow these steps and you'll save a considerable amount of money by not having to pay a dealership to do it for you. This will save you money on towing costs and a spare key.